LTC KIT-ABB

ABB UZE/UZF

1000-001K, KIT-REVERSE SWITCH UPGRADE, 33 POSITION 1000-005K, KIT-SELECTOR SWITCH AND REVERSING SW., 33 POSITION 1000-149K, KIT-SELECTOR SW., ABB UZE/UZF RT & RN, 33 POSITION 1000-150K, KIT-"T" HANDLE UPGRADE 1000-154K, KIT-SELECTOR SWITCH, 21 POSITION, ABB, UZE 1000-155K, KIT-SELECTOR & REVERSING SWITCH, 21 POSITION, ABB, UZE 1000-159K, KIT-SELECTOR SWITCH, 17 POSITION, ABB, UZE 1000-160K, KIT-SELECTOR & REVERSING SWITCH, 17 POSITION, ABB, UZE

GASKETS

MISCELLANEOUS

MISCELLANEOUS

1000-189 BRACKET ASSEMBLY SCALE 0.500

1000-188 HUB, COLLECTOR SCALE 0.500

1000-233 STANDARD PELICAN CASE W/CUSTOM FOAM FOR 1000-005K-V1 SCALE 0.100

GASKETS, ABB, UZE/UZF

GASKET, TAP CHANGER DOORS & COVERS (UZE/UZF)

GAKETS, TANK DOOR (UZE)

1000-249, TAP CHANGER DOOR 200 & 250 KV (UZE) 1000-321, TAP CHANGER DOOR 380 KV (UZE) 1000-322, TAP CHANGER DOOR 550 & 650 KV (UZE) 1000-323-001, TAP CHANGER DOOR 200 & 250 KV (UZF) 1000-323-002, TAP CHANGER COVER 200 & 250 KV (UZF) 1000-324-001, TAP CHANGER DOOR 380 KV (UZF) 1000-324-002, TAP CHANGER COVER 380 KV (UZF) 1000-325-001, TAP CHANGER DOOR 550 & 650 KV (UZF) 1000-325-002, TAP CHANGER COVER 550 & 650 KV (UZF)

1000-204, TANK DOOR 200 & 250 KV (UZE) (UNITS MANUFACTURED IN LUDVIKA SE 1991 AND EARLIER) 1000-326, TANK DOOR 200 & 250 KV (UZE) (UNITS MANUFACTURED IN LUDVIKA SE 1992 AND LATER)

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

ABB UZE, UZF

J1

1 1000-001K

REVISIONS

NOTES: 1. THIS KIT IS FOR REVERSING SWITCH UPGRADE, ON UZE RT & RN AND UZF RT & RN UNITS. 2. UZE/UZF RT & RN UNITS BUILT THROUGH 1992 AND BEFORE REQUIRE PART NUMBER 1000-150K, KIT, "T" HANDLE UPGRADE

DATE APPROVAL

DESCRIPTION

REV

1. DRAWING AND MODELS UPDATED IN PRO-E 3D 2. KIT CONFIGURATION REVISED PER ECR # 180829D 1. ITEM 8010-069-38 WAS 1000-134

4 1

10 5

G

08-30-18

TA

JP

7 1

A

8 1

6 1

PER ECR # 181127A H

12/04/18

SK JP

A

1. REPLACE 8010-068-41 TO -58 PER ECR #190418A

J

4/22/19

TL

JP

UPDATE TO REMOVE ONLY USED ON 33

POSITION PER ECR #210715A J1

07/15/21

AG

JP

B

B

C

5 1

C

2 1

REVERSING SWITCH, MOVING CONTACT ASSEMBLY WITH "T" HANDLE GROUP 2 REQUIRED

D

10 5

4 1

D

3 2

7 2

8 2

6 1

8 1

7 1

9 2

10

15

8010-115-816 8010-068-58 8010-101-16 8010-115-814 8010-069-38

WASHER, BELLEVILLE HIGH CARBON STEEL, .415ID X ..897OD SCREW, HEX. HEAD METRIC 10M X 1.5 X 30 LG, CAD-ZN ST WASHER, FLAT, YEL BRASS ID 1.000, OD 1.750, THK .020

1 2 3 4 5 6 7 8 9

1 2 6 3 3 3 9 9 6

E

WASHER, FLAT .438 ID X 1.00 OD X .070 THK

E

SCREW, HEX. HEAD METRIC 10M X 1.5 X 40 LG, CAD-ZN ST

1000-203 1000-202 1000-075 1000-236 1000-073

RING, COLLECTOR, OFFSET PIN, TAPERED, MODIFIED

REVERSE SWITCH, MOVING CONTACT, W/ NO HANDLE REVERSE SWITCH, MOVING CONTACT, W/ T HANDLE CONTACT, STATIONARY, REVERSE SWITCH, LH/RH

ITEM NO.

TITLE

QTY

DRAWING NO.

PARTS LIST

5 2

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

M

-

-

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

CONTACT, STATIONARY REVERSING SWITCH LEFT HAND AND RIGHT HAND 3 SETS REQUIRED

F

1000-005K NEXT ASSY

-

1 1

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

KIT, REVERSE SWITCH, UPGRADE

DO NOT SCALE DRAWING

DRAWN

- 08-20-18 NC 08-19-18 TIM A

REVERSING SWITCH, MOVING CONTACT ASSEMBLY WITHOUT "T" HANDLE 1 REQUIRED

MATERIAL ANALYSIS NUMBER:

CHECKED

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1000-001K

QC

J1

1.000

D

MATERIAL

SHEET

SEE PARTS LIST

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

1 of 1

4

1

2

3

5

6

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

ABB UZE, UZF

D

1000-005K

1

REVISIONS

NOTES: 1. THIS DRAWING DEFINES TWO DIFFERENT KIT CONFIGURATIONS: VERSION 1 (V1): 150 AMP AND ABOVE MAXIMUM RATED THRU-CURRENT

DATE APPROVAL

DESCRIPTION

REV

1. DRAWING AND MODELS UPDATED IN PRO-E 3D 2. KIT RESTRUCTURED FROM CHANGES TO 1000-001K, 1000-149K; NOTES UPDATED; V2 ADDED; REMOVE SHT2 PER ECR 180829D

REQUIRE TUNGSTEN CONTACT ROLLERS AND STATIONARY CONTACTS WITH TUNGSTEN TIPS VERSION 2 (V2): 149 AMP AND LESS MAXIMUM RATED THRU-CURRENT REQUIRE COPPER CONTACT ROLLERS, AND STATIONARY CONTACTS WITH NO TUNGSTEN TIPS 2. UZE/UZF RT & RN UNITS BUILT THROUGH 1992 AND BEFORE REQUIRE PART NUMBER 1000-150K, KIT, "T" HANDLE UPGRADE

D

TA JP 08-30-18

A

A

BRIDGING CONTACTS 6 REQUIRED

B

B

2 1

ARCHING SHIELD 6 REQUIRED

CONTACT ASSEMBLY, STATIONARY, DOUBLE 3 REQUIRED

CONTACT ASSEMBLY, STATIONARY, SINGLE 48 REQUIRED

SPRING PIN FOR ARCING SHIELD 6 REQUIRED

SELECTOR, MAIN MOVING CONTACT ROLLER ASSEMBLY 3 REQUIRED

SELECTOR, MAIN CURRENT MOVING ROLLER CONTACT ASSEMBLY 3 REQUIRED

C

C

D

D

1 1

E

E

1000-149K-V1 1000-149K-V2

1

-

KIT, SELECTOR SWITCH, ABB UZE/UZF RT & RN, 33 POSITION (150amp OR GREATER) KIT, SELECTOR SWITCH, ABB UZE/UZF RT & RN, 33 POSITION (149amp 0R LESS)

2

REVERSING SWITCH, MOVING CONTACT ASSEMBLY WITH "T" HANDLE GROUP 2 REQUIRED

-

1 1

1000-001K

1

1

KIT, REVERSE SWITCH, UPGRADE

REVERSING SWITCH, MOVING CONTACT ASSEMBLY WITHOUT "T" HANDLE 1 REQUIRED

ITEM NO.

V1

DRAWING NO.

TITLE

V2

QTY

PARTS LIST

CONTACT, STATIONARY REVERSING SWITCH LEFT HAND AND RIGHT HAND 3 SETS REQUIRED

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

M

-

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

NEXT ASSY

-

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

KIT, SELECTOR SWITCH AND REVERSING SWITCH, 33 POSITION

DO NOT SCALE DRAWING

DRAWN

TIM A

08-09-18

MATERIAL ANALYSIS NUMBER:

CHECKED

NC

08-10-18

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1000-005K

QC

-

D

0.750

D

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

4

1

2

3

5

6

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

ABB UZE, UZF

D

1000-149K

1

REVISIONS

NOTES: 1. THIS DRAWING DEFINES TWO DIFFERENT KIT CONFIGURATIONS: VERSION 1 (V1): 150 AMP AND ABOVE MAXIMUM RATED THRU-CURRENT

DATE APPROVAL

DESCRIPTION

REV

1. DRAWING AND MODELS UPDATED IN PRO-E 3D; V2 ADDED; 1000-090, 1030-207, & 8010-072-314 ADDED PER ECR # 180829D

B

08-30-18

TA

JP

REQUIRE TUNGSTEN CONTACT ROLLERS AND STATIONARY CONTACTS WITH TUNGSTEN TIPS VERSION 2 (V2): 149 AMP AND LESS MAXIMUM RATED THRU-CURRENT REQUIRE COPPER CONTACT ROLLERS, AND STATIONARY CONTACTS WITH NO TUNGSTEN TIPS 2. UZE/UZF RT & RN UNITS BUILT THROUGH 1992 AND BEFORE REQUIRE PART NUMBER 1000-150K, KIT, "T" HANDLE UPGRADE

A

1. ITEM 11 WAS 8010-068-61 2. ITEM 15 WAS 8010-101-21 PER ECR # 190524A

C

05/24/19

SK

JP

A

ON THE V2 COLUMN, ITEM 2 WAS "-"; ON V2 COLUMN ITEM 5 WAS 6; UPDATED ITEM 5 PICTORIAL PER ECR #200529A

D

05/29/20

MS AG

7 2

10 2

8 2

5 1

15 2

B

11 2

B

9 2

6 1

14 1

BRIDGING CONTACTS V1 VERSION 6 REQUIRED V2 VERSION 3 REQUIRED

C

C

2 1

SPRING PIN FOR ARCING SHIELD 6 REQUIRED

1 1

V2

V1

ARCING SHIELD 6 REQUIRED

SELECTOR, MAIN, MOVING CURRENT CARRYING, CONTACT ROLLER ASSEMBLY 3 REQUIRED

SELECTOR, MAIN MOVING CONTACT ROLLER ASSEMBLY 3 REQUIRED

D

D

12 2

6 6

6 6

1030-206

WASHER, BELLEVILLE SPRING STEEL, .343 ID X .703 OD

10 11 12 13 14 15

13 2

8010-115-715 8010-101-20 8010-068-62 8010-115-615 8010-069-23 8010-099-609 8010-132-12 8010-072-314

PIN, SPRING 1/8" DIA X 1.00" LG

108 108

108 108

WASHER, RING, TIGHT LOCK, #.25, STEEL

12 4

SCREW,HEX. HEAD METRIC M8 X 1.25 X 35 LG, CAD-ZN ST WASHER, BELLEVILLE HIGH CARBON STEEL, .26ID X .538OD WASHER, FLAT, SAE STEEL (8mm) .340 ID x .630 OD x .078 THK SCREW, HEX. HEAD METRIC M6 X 1 X 35 LG, CAD-ZN ST WASHER, FLAT, YELLOW BRASS (.31) .319 ID x .593 OD x .063 THK SCREW, SOCKET HD, METRIC, STEEL, M6 X 1 X 16MM LG.

3 6 6 6 6 6 6

6 6 6 6 6 6 6

4 1

V2

V1

5 6 7 8 9

E

13 4

1000-163 1000-242 1000-157P 1000-159 1000-160 1000-240 1000-090 1030-209

SHIELD, ARCING

E

CONTACT ASSEMBLY, STATIONARY, DOUBLE CONTACT ASSEMBLY, STATIONARY, SINGLE CONTACT BODY, STATIONARY (NO TUNGSTEN TIP) BRIDGING CONTACT ASSEMBLY, SELECTOR SWITCH

-

48

4

-

48

3 3 3

3 3

2 3

CONTACT AND ROLLER ASSEMBLY

3 1

-

CONTACT, ROLLER ARCHING ASSEMBLY (COPPER ROLLER)

1

-

3

CONTACT, ROLLER ARCHING ASSEMBLY

CONTACT ASSEMBLY, STATIONARY, SINGLE 48 REQUIRED

ITEM NO.

V2

V1

DRAWING NO.

TITLE

CONTACT ASSEMBLY, STATIONARY, DOUBLE 3 REQUIRED

QTY

PARTS LIST

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

M

-

-

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

1000-005K NEXT ASSY

-

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

KIT, SELECTOR SWITCH, ABB UZE/UZF RT & RN, 33 POSITION

DO NOT SCALE DRAWING

DRAWN

TIM A

08-09-18

MATERIAL ANALYSIS NUMBER:

CHECKED

NC

08-10-18

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1000-149K

QC

-

D

1.000

D

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

4

1

2

3

5

6

ABB UZE, UZF

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

1 A1 1000-150K

REVISIONS

NOTES: 1. USE AS NEEDED TO ADJUST AXIAL PLAY BETWEEN COUPLING AND SHAFT. 2. UZE/UZF RT & RN UNITS BUILT THROUGH 1992 AND BEFORE REQUIRE PART NUMBER 1000-150K, KIT, "T" HANDLE UPGRADE. (REFERENCE TO 1000-005K & 1000-149K KIT DRAWINGS)

LTR

REVISION

DATE

APPROVAL

1. NEW DRAWING PER DRC # 082718A A PER ECR #181029A A1

TA JP 08-28-18

1. ADDED NOTE 2 TO DRAWING

10/29/18

TL JP

SEE NOTE 1

3 18

7 12

5 6

12

8010-099-613 8010-099-716 8010-132-02 8010-132-03

WASHER, RING, TIGHT LOCK, #.25, STEEL WASHER, RING, TIGHT LOCK, #.31, STEEL

1 2 3 4 5 6 7

3 6 6

SCREW, SOCKET HD, METRIC, STEEL, M6 X 1 X 25MM LG. SCREW, SOCKET HD, METRIC, STEEL, M8 X 1.25 X 40MM LG.

18

1000-132 1000-133 1000-135

WASHER, FLAT, PRESSBOARD

6 6

1 3

2 3

4 3

3 3

TAIL SHAFT, ASSEMBLY BRACKET, TAIL SHAFT

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

M

-

-

C

Prolec-GE Waukesha, Inc. All rights reserved.

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

NEXT ASSY

DRC 082718A

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247 KIT, "T" HANDLE UPGRADE

X° ± 1°

TITLE

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

- - 08-10-18 NC 08-09-18 TIM A

MATERIAL ANALYSIS NUMBER:

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

A1 1000-150K

1.000

QC

B

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 A1

ABB UZE,UZF

1000-154K

REVISIONS

NOTES: 1. THIS DRAWING DEFINES KIT CONFIGURATION: 150 AMP AND ABOVE MAXIMUM RATED THRU-CURRENT REQUIRE TUNGSTEN CONTACT ROLLERS AND STATIONARY CONTACTS WITH TUNGSTEN TIPS 2. UZE RN UNITS BUILT THROUGH 1992 AND BEFORE REQUIRE PART NUMBER 1000-150K, KIT, "T" HANDLE UPGRADE. 3. ASSEMBLY NOT REQUIRED PUT HARDWARE IN PLASTIC BAG.

LTR

REVISION

DATE

APPROVAL

INITIAL RELEASE A

AG JP 07/15/2020

UPDATE TO INCLUDE 23 POSITION AND UZF PER ECR #210715A

A1

AG JP 07/15/21

13 6

14 6

12 6

6 6

78

1000-090 1000-157P 1000-245 1000-246 1000-306 1030-206 1030-209 8010-068-62 8010-069-23 8010-072-314 8010-099-609 8010-101-20 8010-115-615 8010-115-715 8010-132-12

WASHER, RING, TIGHT LOCK, #.25, STEEL

10 11 12 13 14 15

9 6

6 3 3 3 6 6 6 6 6 6 6 6

SCREW, SOCKET HD, METRIC, STEEL, M6 X 1 X 16MM LG. WASHER, BELLEVILLE HIGH CARBON STEEL, .26ID X .538OD SCREW, HEX. HEAD METRIC M6 X 1 X 35 LG, CAD-ZN ST SCREW,HEX. HEAD METRIC M8 X 1.25 X 35 LG, CAD-ZN ST

8 6

2 3

78

5 3

SPRING PIN SLOTTED, STEEL 1.000X.125 DIA

WASHER, FLAT, SAE STEEL (8mm) .340 ID x .630 OD x .078 THK WASHER, FLAT, YEL BRASS ID .319, OD .593, THK .063

1 2 3 4 5 6 7 8 9

11 66

3 3

11 12 15 12

SHIELD, ARCING

15 66

CONTACT ASSEMBLY, STATIONARY, DOUBLE CONTACT ASSEMBLY, STATIONARY, SINGLE CONTACT, ROLLER ARCING ASSEMBLY WASHER, BELLEVILLE .703 OD X .343 ID

4 33

33

CONTACT AND ROLLER ASSEMBLY

BRIDGING CONTACT ASSEMBLY, SELECTOR SWITCH

ITEM NO.

QTY

DRAWING NO.

TITLE

10 6

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

N/A

N/A

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

1000-155K NEXT ASSY

DRC #071420A

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

KIT-SELECTOR SWITCH 21/23 POSITION

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

07/15/2020 J. PRUENTE 07/13/2020 A. GAYTAN

N/A

CHECKED

1 6

7 6

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

A1 1000-154K

QC

N/A

B

0.500

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved. .

SEE PARTS LIST

1 of 1

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 A1

ABB UZE, UZF

1000-155K

REVISIONS

NOTES: 1. THIS DRAWING DEFINES KIT CONFIGURATION: 150 AMP AND ABOVE MAXIMUM RATED THRU-CURRENT REQUIRE TUNGSTEN CONTACT ROLLERS AND STATIONARY CONTACTS WITH TUNGSTEN TIPS. 2. UZE RN UNITS BUILT THROUGH 1992 AND BEFORE REQUIRE PART NUMBER 1000-150K, KIT, "T" HANDLE UPGRADE. 3. ASSEMBLY NOT REQUIRED PUT HARDWARE IN PLASTIC BAGS.

LTR

REVISION

DATE

APPROVAL

INITIAL RELEASE A

AG JP 07/15/2020

UPDATE TO INCLUDE 23 POSITION AND UZF PER ECR #210715A

A1

AG JP 07/15/21

2 1

1 1

1 1

1000-001K 1000-154K

KIT, REVERSE SWITCH, UPGRADE KIT-SELECTOR SWITCH 21/23 POSITION

1 2

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

N/A

N/A

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

NEXT ASSY

DRC #071420A

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

KIT-SELECTOR & REVERSING SWITCH 21/23 POSITION

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

07/15/2020 J. PRUENTE 07/13/2020 A. GAYTAN

N/A

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

A1 1000-155K

QC

N/A

B

0.375

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved. .

SEE PARTS LIST

1 of 1

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 A

ABB UZE

1000-159K

REVISIONS

NOTES: 1. THIS DRAWING DEFINES KIT CONFIGURATION: 150 AMP AND ABOVE MAXIMUM RATED THRU-CURRENT REQUIRE TUNGSTEN CONTACT ROLLERS AND STATIONARY CONTACTS WITH TUNGSTEN TIPS 2. UZE RN UNITS BUILT THROUGH 1992 AND BEFORE REQUIRE PART NUMBER 1000-150K, KIT, "T" HANDLE UPGRADE. 3. ASSEMBLY NOT REQUIRED PUT HARDWARE IN PLASTIC BAG.

LTR

REVISION

DATE

APPROVAL

INITIAL RELEASE A

AG JP 05/27/2020

13 6

14 6

6 6

12 6

78

1000-090 1000-157P 1000-245 1000-246 1000-306 1030-206 1030-209 8010-068-62 8010-069-23 8010-072-314 8010-099-609 8010-101-20 8010-115-615 8010-115-715 8010-132-12

WASHER, RING, TIGHT LOCK, #.25, STEEL

10 11 12 13 14 15

8 6

9 6

6 3 9 3 6 6 6 6 6 6 6 6

SCREW, SOCKET HD, METRIC, STEEL, M6 X 1 X 16MM LG. WASHER, BELLEVILLE HIGH CARBON STEEL, .26ID X .538OD SCREW, HEX. HEAD METRIC M6 X 1 X 35 LG, CAD-ZN ST SCREW,HEX. HEAD METRIC M8 X 1.25 X 35 LG, CAD-ZN ST

5 3

2 3

78

SPRING PIN SLOTTED, STEEL 1.000X.125 DIA

WASHER, FLAT, SAE STEEL (8mm) .340 ID x .630 OD x .078 THK WASHER, FLAT, YEL BRASS ID .319, OD .593, THK .063

1 2 3 4 5 6 7 8 9

11 42

3 9

11 36 15 36

SHIELD, ARCING

15 42

CONTACT ASSEMBLY, STATIONARY, DOUBLE CONTACT ASSEMBLY, STATIONARY, SINGLE CONTACT, ROLLER ARCING ASSEMBLY WASHER, BELLEVILLE .703 OD X .343 ID

4 21

21

CONTACT AND ROLLER ASSEMBLY

BRIDGING CONTACT ASSEMBLY, SELECTOR SWITCH

ITEM NO.

QTY

DRAWING NO.

TITLE

10 6

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

1000-160K NEXT ASSY

DRC #052720A

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

KIT-SELECTOR SWITCH 17 POSITION, ABB UZE

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

05/27/2020 J. PRUENTE 05/20/2020 A. GAYTAN

CHECKED

1 6

7 6

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

A 1000-159K

QC

B

0.500

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved. .

SEE PARTS LIST

1 of 1

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 A

ABB UZE

1000-160K

REVISIONS

NOTES: 1. THIS DRAWING DEFINES KIT CONFIGURATION: 150 AMP AND ABOVE MAXIMUM RATED THRU-CURRENT REQUIRE TUNGSTEN CONTACT ROLLERS AND STATIONARY CONTACTS WITH TUNGSTEN TIPS. 2. UZE RN UNITS BUILT THROUGH 1992 AND BEFORE REQUIRE PART NUMBER 1000-150K, KIT, "T" HANDLE UPGRADE. 3. ASSEMBLY NOT REQUIRED PUT HARDWARE IN PLASTIC BAGS.

LTR

REVISION

DATE

APPROVAL

INITIAL RELEASE A

AG JP 07/15/2020

2 1

1 1

1 1

1000-001K 1000-159K

KIT-SELECTOR SWITCH 17 POSITION, ABB UZE

1 2

KIT, REVERSE SWITCH, UPGRADE

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

N/A

N/A

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

NEXT ASSY

DRC #071420A

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

KIT-SELECTOR & REVERSING SWITCH 17 POSITION, ABB UZE

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

07/14/2020 J. PRUENTE 07/13/2020 A. GAYTAN

N/A

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

A 1000-160K

QC

N/A

B

0.375

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved. .

SEE PARTS LIST

1 of 1

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 C

ABB UZE, UZF

1000-203

REVISIONS

NOTES: 1. FOR USE IN UZE/UZF TAP CHANGERS.

LTR

REVISION

DATE

APPROVAL

1) REDRAWN IN PRO-E DATABASE 2) REVISED TO MATCH ABB CONFIGURATION 3) P/L 000-062 WAS 1000-062P 4) REMOVED "US MANUFACTURED" FROM NOTE 1. PER ECR # 180514A 1. P/L 1000-062P WAS 1000-062 2. P/L 1000-064 WAS 1000-236 PER ECR# 180801C

B

TA JP 06-20-18

3 1

C

TA JP 08-03-18

3 REF

2 1

4 1

FLARE THIS END AFTER SEATED

1 1

EXISTING M8-1.25 THREAD. USE M8-1.25 SETSCREW TO SECURE SHAFT AND CONTACT ASSEMBLY FOR REAMING. DISCARD SETSCREW AFTER PIN IS INSTALLED

3.000

NO. 5 TAPERED REAMER, REAM FROM THIS SIDE TO .289 .002 LOCATE AT EXISTING HOLE

PARALLEL SURFACES

PARALLEL SURFACE

1 1 1 1 1

1000-203-FIXTURE

UZE/F REVERSE SWITCH, FIXTURE

1 2 3 4 5

1000-062P 1000-064 1000-073 1000-131

SHAFT

RING, COLLECTOR, STREIGHT PIN, TAPERED, MODIFIED

CONTACT ASSY, MOVING, REVERSE SWITCH

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

P

-

-

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

1000-001K NEXT ASSY

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

REVERSE SWITCH, MOVING CONTACT, W/ NO HANDLE

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

TIM A

08-07-18 08-06-18

CHECKED

NC

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

C 1000-203

QC

B

0.750

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved. .

SEE PARTS LIST

1 of 1

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 C

ABB UZE

1000-202

REVISIONS

NOTES: 1. FOR USE IN UZE/UZF TAP CHANGERS.

LTR

REVISION

DATE

APPROVAL

1) REDRAWN IN PRO-E DATABASE 2) REVISED TO MATCH ABB CONFIGURATION 3) P/L 000-062 WAS 1000-062P 4) REMOVED "US MANUFACTURED" FROM NOTE 1. PER ECR # 180514A 1. P/L 1000-062P WAS 1000-062 2. P/L 1000-064 WAS 1000-236 PER ECR# 180801C

4 1

B

TA JP 06-20-18

3 1

C

TA JP 08-03-18

2 1

3 REF

1 1

FLARE THIS END AFTER SEATED

3.000

NO. 5 TAPERED REAMER, REAM FROM THIS SIDE TO .289 .002 LOCATE AT EXISTING HOLE

EXISTING M8-1.25 THREAD. USE M8-1.25 SETSCREW TO SECURE SHAFT AND CONTACT ASSEMBLY FOR REAMING. DISCARD SETSCREW AFTER PIN IS INSTALLED

PARALLEL SURFACES

PARALLEL SURFACES

1 1 1 1

1000-062P 1000-064 1000-073 1000-074

SHAFT ASSEMBLY

1 2 3 4

RING, COLLECTOR, STREIGHT PIN, TAPERED, MODIFIED

CONTACT ASSY, MOVING, REVERSE SWITCH

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

P

-

-

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

1000-001K NEXT ASSY

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

REVERSE SWITCH, MOVING CONTACT, W/ T HANDLE

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

TIM A

06-19-18 06-18-18

CHECKED

NC

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

C 1000-202

QC

B

0.750

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved. .

SEE PARTS LIST

1 of 1

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 C1

ABB UZE

1000-163

REVISIONS

LTR

REVISION

DATE

APPROVAL

1) REDRAWN IN PRO-E DATABASE

PER ECR # 180816A B1

TA JP 08-28-18

1) ITEM 5 WAS 8 PCS. ADD TORQUE NOTE. 2) ITEM 6 WAS 8010-068-61

PER ECR# 181130B C

AM JP

11/30/2018

1. ADDED OEM NOTE TO DRAWING

PER ECR #200629C C1

AM TL

6/29/20

2 1

9 4

2 1 8 4 4 4 8 4

8010-068-29 8010-101-20 8010-115-509 8010-115-611

WASHER, FLAT, SAE STEEL .281 ID x .625 OD x .093 THK WASHER, BELLEVILLE HIGH CARBON STEEL, .26ID X .538OD SCREW, HEX HEAD METRIC M5X.8X16 LG, CAD-ZN ST SCREW, HEX. HEAD METRIC M6 X 1 X 20 LG, CAD-ZN ST

1 2 3 4 5 6 7 8 9

7 4

6 4

12

1000-153 1000-154 1030-216 1030-217 1030-222

ROLLER ASSEMBLY 2 HOLES SPACER

1 2

WASHER, BELLEVILLE .421 OD X .218 ID

5 12

MOUNT, ROLLER CONTACT MOUNT, ROLLER ASSEMBLY

ITEM NO.

3 8

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

8 8

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

N/A

N/A

4 4

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

1000-149P 1000-149K NEXT ASSY

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

CONTACT, ROLLER ARCHING ASSEMBLY

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

TIM A

08-27-18 08-26-18

N/A

CHECKED

NC

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

C1 1000-163

QC

N/A

B

0.750

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved. .

SEE PARTS LIST

1 of 1

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 A1

ABB UZE

1000-242

REVISIONS

NOTES: 1. TORQUE TO BE 69 IN. LBS [0.8 KPM]. PUT PAINT DOT ON ALL TORQUED HARDWARE.

LTR

REVISION

DATE

APPROVAL

1) NEW DRAWING PER DRC # 082018C A

TA JP 08-28-18

ADDED NOTE 1; ADDED NHA PER

ECR #200529F A1

5/29/20

MS AG

4 8

8 8

2 1 4 8 8 4 4 8 4

8010-068-61 8010-101-20 8010-115-509 8010-115-611

WASHER, FLAT, SAE STEEL (6mm) .260 ID x .580 OD x .062 THK WASHER, BELLEVILLE HIGH CARBON STEEL, .26ID X .538OD SCREW, HEX HEAD METRIC M5X.8X16 LG, CAD-ZN ST SCREW, HEX. HEAD METRIC M6 X 1 X 20 LG, CAD-ZN ST

1 2 3 4 5 6 7 8 9

3 4

9 4

1000-153 1000-154 1000-237 1030-216 1030-222

2 HOLES SPACER

WASHER, BELLEVILLE .421 OD X .218 ID

7 4

MOUNT, ROLLER CONTACT MOUNT, ROLLER ASSEMBLY ROLLER ASSEMBLY, LOW AMP

6 4

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

-

-

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

1000-149K-V2 NEXT ASSY

DRC 082018C

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

CONTACT, ROLLER ARCING ASSEMBLY. (ALT)

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

TIM A

06-27-18 06-26-18

2 1

CHECKED

NC

1 2

5 8

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

A1 1000-242

QC

B

0.750

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved. .

SEE PARTS LIST

1 of 1

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 E

ABB UZE

1000-157P

REVISIONS

N0TES: 1. APPLY LOCTITE # 262 TO THREADS, PER MANUFACTURER'S INSTRUCTIONS, 1. TORQUE TO BE 69 IN. LBS [0.8 KPM]. PUT PAINT DOT ON ALL TORQUED HARDWARE. 2. CENTER 8010-072-814 ACROSS 1000-148P. 3. MODIFY ITEM # 7 TO ACHEIVE DIM. BELOW

LTR

REVISION

DATE

APPROVAL

1) 1030-222 QTY WAS 4; 2) ADD 8010-072-814; 3) NUT 8010-100-06 REMOVED; PER ECR# 181203A 1) 1000-071 WAS 1000-156 2) 8010-101-24 WAS 1030-216 PER ECR# 181220B 1. ADDED DIM. & NOTE #3

C

TA JP 12-03-18

D

TA JP 12-20-18

12 4

7 2

PER ECR# 190725A D1

SK JP 07/25/19

11 4

10 1

1) .999 DIM. WAS +.006, -.000

PER ECR# 200902B E

AM JP

9/2/2020

1

4 1 2 1 2 2 2 6 1 1 4 4 2

1000-071 1000-082 1000-146 1000-148P 1000-155P 1030-216 1030-217 1030-222 8010-068-05 8010-073-106 8010-101-24 8010-115-510 8010-115-516

SCREW, HEX HEAD METRIC M5X.8X18 LG, CAD-ZN ST SCREW, HEX HEAD METRIC M5X.8X40 LG, CAD-ZN ST

10 11 12 13

3

6 2

WASHER, BELLEVILLE HCS. .204ID X .394OD

.999 +.000 -.006

9 1

PIN, COTTER .078 DIA X .63 LG

5 2

WASHER,FLAT, ST..250 IDx.562 OD x .062 THK

1 2 3 4 5 6 7 8 9

1 4

ROLLER ASSEMBLY 2 HOLES SPACER

WASHER, BELLEVILLE .421 OD X .218 ID

CONTACT ASSEMBLY

MOUNT, ROLLER CONTACT

MOUNT, ROLLER CONTACT, ARCHING

PIN, CONTACT

SPRING, MAIN CONTACT

4 1

ITEM NO.

QTY

DRAWING NO.

TITLE

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

-

-

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

3 2

1000-149 NEXT ASSY

2 1

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247

X° ± 1°

TITLE

CONTACT AND ROLLER ASSEMBLY

APPROVALS

DATE

8 6

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

TIM A

08-02-18 08-01-18

CHECKED

NC

13 2

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

E 1000-157P

QC

B

1.000

1

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved. .

SEE PARTS LIST

1 of 1

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

ABB UZE/UZF

1000-233

1 E

REVISIONS

5 1

DATE APPROVAL

DESCRIPTION

REV

2

NOTES: 1. THIS FOAM KIT HAS 2 CASES. 1000-233-1, SHEET 1 OF 2 1000-233-2, SHEET 2 OF 2. INCLUDED WITH FOAM CASE. 2

1. NEW DRAWING CREATED

PER DRC #113012A A PER ECR 140710B B PER ECR #181016A C

12/4/12

TL

JP

1. ADDED CASE TO KIT

7/14/14

TL

JP

A

1. UP-DATE CASE TO THE NEW KIT DWG.

2/6/19

TL

JP

A

1. UP-DATE BOM IN DRAWING AND GSS PER ECR #190401B D

4/2/19

TL

JP

2 1

1. UP-DATED TO NEW VENDOR REQUIREMENTS, PER ECR #200824A E

8/24/20

TL

JP

4 1

B

B

ALL COMPONENTS ARE NOT INCLUDED IN THIS CASE KIT. SHOWN FOR REFERENCE ONLY

1 1

2

ALL COMPONENTS ARE IN A PLASTIC BAG. PLASTIC BAG NOT SHOWN FOR CLARITY

C

C

EXTRA SLOTS FOR MISC. ITEM

D

D

E

CASE, PELICAN STANDARD (W/CUSTOM FOAM) FOAM INSERT COVER, (PART OF CASE)

1 2 3 4 5

1000-205-1 1 1000-207 1 1000-210-13 1 1030-1693 1 2000-1456 1

E

LABEL, OUTER CASE (PART OF CASE)

1.13

BOTTOM FOAM, INSERT FOR (1000-005K-V1, ABB UZE/UZF) LABEL, COVER FOAM INSERT, (ABB UZE/UZF 1000-005K)

7.67

ITEM NO.

QTY

DRAWING NO.

TITLE

3 1

2

PARTS LIST

SOURCE: (M/P)

HVS MATERIAL CODE:

QTY. OF MATERIAL:

Prolec-GE Waukesha, Inc. All rights reserved.

C

M

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

F

#113012A

9011 GOVERNORS ROW DALLAS, TEXAS 75247

F

.XX ± .01 .XXX ± .005

X ± 1

TITLE

APPROVALS DATE

STANDARD PELICAN CASE W/CUSTOM FOAM FOR 1000-005K-V1

DO NOT SCALE DRAWING

DRAWN

T. LY

12/03/12

MATERIAL ANALYSIS NUMBER:

NEXT ASSY

CHECKED

JP

12/03/20

SIZE

SCALE

DWG. NO.

REV.

DATE ANALYSIS PERFORMED:

1000-233

E

QC

D

0.250

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 2

4

1

2

3

5

6

4

2

3

5

6

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV.

ABB UZE/UZF

1000-233

E 2

A

5 1

2

2 1

B

B

ALL COMPONENTS ARE NOT INCLUDED IN THIS CASE KIT. SHOWN FOR REFERENCE ONLY

C

EXTRA OPTIONAL ITEM SLOTS (NOT PARTS OF BASIC KIT)

C

ALL COMPONENTS ARE IN A PLASTIC BAG. PLASTIC BAG NOT SHOWN FOR CLARITY

1 1

2

FOR MISC. ITEM EXTRA SLOT

4 1

D

D

E

E

1000-205-2 1 1000-207 1 1000-210-14 1 1030-1693 1 2000-1456 1

FOAM INSERT COVER

1 2 3 4 5

CASE, PELICAN STANDARD (W/CUSTOM FOAM)

1.13

LABEL, OUTER CASE (PART OF CASE)

BOTTOM FOAM, INSERT FOR (1000-005K-V1, ABB UZE/UZF) LABEL, COVER FOAM INSERT, (ABB UZE/UZF 1000-005K)

3 1

2

7.67

ITEM NO.

DRAWING NO. QTY

TITLE

F

PARTS LIST

F

TITLE

STANDARD PELICAN CASE W/CUSTOM FOAM FOR 1000-005K-V1

SIZE

SCALE

DWG. NO.

REV.

1000-233

0.375

E

D

MATERIAL

SHEET

SEE PARTS LIST

2 of 2

4

1

2

3

5

6

ABB UCF

GASKETS

1000-153K, KIT-CONTACT ABB, UCF

GASKETS, ABB UCF

1000-259 GASKET, FOR COVER

4

1

2

3

EQUIPMENT TYPE / NO.

DWG. NO.

SH

REV. 1 A

ABB UCF

1000-153K

REVISIONS

LTR

REVISION

DATE

APPROVAL

NOTES: DO NOT ASSEMBLE HARDWARE. PUT THESE PARTS AND HARDWARE IN PLASTIC BAGS. SEAL ALL PARTS IN A PLASTIC BAG. 1. 2.

INITIAL RELEASE A

AG NC 09/25/19

A

A

2 1

1.

1.

6 6

1 6

3 3

B

B

1.

C

C

6 1 3 6 2 6

1000-258 1000-259 1000-268 1000-269 1000-285 1000-286

FIXED CONTACT UCF DIVERTER W/HDW CURRENT COLLECTOR ASSEMBLY FIXED CONTACT SUPPORT ASSEMBLY

1 2 3 4 5 6

1.

MAIN MOVING CONTACT AND ROLLER ASSEMBLY

COVER GASKET

ROLLER CONTACT ARCING ASSEMBLY

ITEM NO.

2.

QTY

DRAWING NO.

TITLE

5 2

PARTS LIST

QTY. OF MATERIAL:

HVS MATERIAL CODE:

SOURCE: (M/P)

C

Prolec-GE Waukesha, Inc. All rights reserved.

M

N/A

N/A

DRC / ECR NUMBER:

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCE ARE FRACTIONS DECIMALS ANGLES

4 6

D

D

NEXT ASSY

DRC #092319A

.XX ± .01 .XXX ± .005

9011 GOVERNORS ROW DALLAS, TEXAS 75247 ABB UCF CONTACT KIT

X° ± 1°

TITLE

APPROVALS

DATE

DO NOT SCALE DRAWING

DRAWN

MATERIAL ANALYSIS NUMBER:

N. CASSILLA A. GAYTAN

09/25/19 09/25/19

CHECKED

DATE ANALYSIS PERFORMED:

SIZE

SCALE

DWG. NO.

REV.

A 1000-153K

QC

C

1.250

MATERIAL

SHEET

COMPANY AND PROPRIETARY: This document contains proprietary information of Prolec-GE Waukesha, Inc. ("Waukesha") and may not be disclosed, copied, modified or used without the written permission of Waukesha. If Waukesha has authorized your possession and/or use of this document, Waukesha has granted you a limited, revocable license to use this document and the information in it only for purposes specified by Waukesha. The document must be promptly returned to Waukesha, after its use and/or upon demand by Waukesha. Any possession, disclosure, copying, modification or use not authorized by Waukesha, can constitute a violation of applicable law and be subject to severe penalties. ©2022 Prolec-GE Waukesha, Inc. All Rights Reserved.

SEE PARTS LIST

1 of 1

1

2

3

4